Будь ласка, використовуйте цей ідентифікатор, щоб цитувати або посилатися на цей матеріал:
http://ds.knu.edu.ua/jspui/handle/123456789/3686
Назва: | Determining the efficiency and parameters of rubble strip reinforcement |
Автори: | Nehrii, Serhii Surzhenko, Andrii Nehrii, Тetiana Toporov, Andrii Fesenko, Eduard Pavlov, Yevhen Domnichev, Mykola Домнічев, Микола Володимирович Домничев, Николай Владимирович |
Ключові слова: | rubble strip bounding surface metal mesh physical modeling strength condi-tion reinforcement parameters |
Дата публікації: | 2021 |
Видавництво: | PC TECHNOLOGY CENTER |
Бібліографічний опис: | Determining the efficiency and parameters of rubble strip reinforcement / S. Nehrii, A. Surzhenko, Т. Nehrii, A. Toporov, E. Fesenko, Y. Pavlov, M. Domnichev // Eastern-European Journal of Enterprise Technologies. – Kharkiv, 2021. – Vol. 3, iss. 7 (111). – P. 74–83. – Ref. 81–83. |
Короткий огляд (реферат): | The necessity of development and improve-ment of methods and means for the protection of preparatory roadways, in particular, protective structures, was proved on the basis of ordinary rock with binding surfaces. Analysis of the results of the study on the use of protective structures of ordinary rock and bounding surfaces was per-formed. It has shown the feasibility of reinforc-ing rock structures to ensure operational condi-tions for the protected roadways. Such structures include rubble strips reinforced with partitions made of metal mesh. To determine their efficiency and reinforcement parameters, studies were per-formed using provisions of structural mechanics, soil mechanics, and bulk media, as well as physi-cal modeling using natural materials.According to the results obtained in the per-formed studies, the efficiency of reinforcement of rubble strips with a metal grid was proved and a procedure for calculation of reinforcement parameters that need to be considered in design-ing the above structures was developed. Such parameters include width and height of the strip, class of reinforcement, its diameter and tensile strength, size of the grid cells, angle of internal friction of rocks, and diameter of maximum rock pieces in the strip.It was established that reinforcement of the rubble strip by partitions made of metal meshes can reduce the width of the strip and volume of the rock fill by 1.33...2.66 times without losing the structure rigidity. To do this, the condition of rein-forcement strength in grids must be met. It consists of comparing its tensile strength with maximum stresses in the partition. These stresses are deter-mined by the magnitude of the load on the rubble strip from the roof rocks, the diameter of the rein-forcement, and the maximum rock pieces, as well as relative extensional strain in reinforcement |
URI (Уніфікований ідентифікатор ресурсу): | https://doi.org/10.15587/1729-4061.2021.235416 http://ds.knu.edu.ua/jspui/handle/123456789/3686 |
ISSN: | (print) 1729-3774 (on-line) 1729-4061 |
Розташовується у зібраннях: | Кафедра охорони праці та цивільної безпеки Наукові статті |
Файли цього матеріалу:
Файл | Опис | Розмір | Формат | |
---|---|---|---|---|
Determining the efficiency and parameters of rubble strip.pdf | 2.46 MB | Adobe PDF | Переглянути/Відкрити |
Усі матеріали в архіві електронних ресурсів захищені авторським правом, всі права збережені.